Second coats on similar colors are almost never recogicnized as being needed until the coat is applied and has dried. ONLY THEN WILL YOU SEE WHETHER IT NEEDS A SECOND COAT or not. Yes, painters can use a cheaper paint then what you paid for. That is solved by getting your own which, I would charge extra for because I will always have to go get more, or add second coat because home owner tried to skimp on paint, or they got the wrong color etc...

A true professional understands that it is his or her responsibility to provide a quality job for the homeowner. Professionals also know that attention to detail is a part of the job. While a homeowner might leave a bit of paint on the window pane, a dedicated interior painter for hire will make sure that these small details are handled properly, because a perfect job is the best calling card.
The speed with which a painter can complete the job will determine its final cost, but time is difficult to estimate. Some painters have more experience and cover a wall faster, but some are more methodical and take more time. Most painters should be able to cover about 100 to 120 square feet of flat surface in an hour, unless they are working on a very large wall. Wood or plaster might reduce that amount to 80 to 100 square feet. You should also consider the time required for a first coat to dry before a second coat may be applied. This will add time as well -- anywhere from one to 48 hours depending on the paint.

The floor and ceiling surfaces cannot be ignored, as they are crucial elements of color combination. Most ceilings are traditionally painted white for a number of reasons — particularly for their ability to keep rooms looking bright and to avoid taking attention away from the walls. Lighter ceiling colors can also help to make a room appear larger and more open.

Even if you go it alone, specialize to keep your initial investment low. If you do only interior painting, for example, you might get by with one ladder, a few brushes, rollers, basic hand tools and such, for an investment of less than $300. Again, you can add to your tools as you need to (every job is a bit different), and parlay profits into the equipment necessary for exterior painting or working on large commercial properties.
Some proposals simply say to paint the walls and ceiling and never specify the number of coats to be applied. If the colors are similar enough, it's possible to get away with one coat of paint and not discount your pricing. No matter how hard you try, tiny, pin-sized air holes will pop exposing the original walls. This may not bother you if you can't notice it, but principally speaking you should have paid your painter less for the work.

They only completed 2/3rds of the job and dumped their paint down a storm drain with a sign saying "dump no waste. Drains to salmon stream". Their owner response was that this was normal to dump paint and their paint was non toxic. In retrospect I should have just called WDFW or Dept. of Ecology. DON'T use this company if you want to protect our environment and want the job done like they said they would.

My friend already posted about this, but the incident is so outrageous it deserves two postings. On a lovely Sunday afternoon, we were out on a  walk and waiting, patiently, on 65th and 1st for the east-west traffic to stop and allow us to cross. When the eastbound traffic was clear, a car heading west stopped to let us cross. Behind this law-abiding driver, heading west, was the Excel Home Painting van. The Excel driver immediately started honking at the car in front of him--you know, the one that stopped to allow pedestrians to cross--and then screaming and cursing at us, including calling us "f**king bitches and whores." Why? Because we were crossing the street. Really?
additionalType URL  An additional type for the item, typically used for adding more specific types from external vocabularies in microdata syntax. This is a relationship between something and a class that the thing is in. In RDFa syntax, it is better to use the native RDFa syntax - the 'typeof' attribute - for multiple types. Schema.org tools may have only weaker understanding of extra types, in particular those defined externally.
I used this company back in around 2006-8, three different projects, interior work. Very professional, quality work and very clean. Never disappointed. What really stood out was the professionalism of this company, especially Ryan. Several years after the work was done, I needed to paint a large spot on my wall that was previously painted by Ryan's company. I couldn't find the paint color that was used. I contacted Ryan for the information, within less than an hour he sent me via email the exact paint used and it's color formula. Again, Ryan is the ultimate professional and provides the best customer service I've ever experienced. I used to do construction with my father as a teenager, I know quality work and I know and see when details are addressed in this companies workmanship. I hIghly recommend this company without any hesitation!

Removing and installing wallpaper can be a tricky task. The crew at CertaPro Painters® is skilled in removing wallpaper and will make this time-consuming task, hassle-free for you. We will work with you to help you choose a wallcoverings style that’s perfect for your home, and then apply it to your walls. All you’ll have to do is enjoy the final look.


The cost to paint an average size room (10X12) ranges from $380-$790, not including ceilings, trim or cost of the paint. DIY, this can cost between $200-$300. When estimating the cost, painters will start with how much paint will be required to complete the job. To know this, they first need to know the size of the area to be covered. The easiest way to calculate the size of the paintable area is to add together the length of the wall and multiply it by the width of the room from floor to ceiling. The resulting amount is the room's square footage. This total is a starting point, as it is not all paintable surface. The painters won't paint the windows and doors, for example, and they must account for ceiling trim and baseboards as well. The next step is to subtract the area of the doors and windows -- along with the square footage of the trim and baseboards -- to get an average. Then, use the same calculation (length x width) on the windows, doors, trim and baseboards, and subtract all of those numbers. The result of this equation is the square footage of the room's walls. This is your surface area number. (Painters will typically add a little square footage back in to this amount to account for extra paint, which may be required.)
Sanding not only feathers out chipped paint but also provides "tooth" for the next coat of paint. For glossy trim, use a sanding sponge rather than sandpaper. Sponges mold to the shape of the trim and last longer than paper. When applying latex over alkyd paint or when he is not sure of the original finish, Brian Doherty, a painter in Richmond, Virginia, follows the hand-sanding with liquid sandpaper to make sure the surface is completely deglossed to prevent incompatibility problems. "I've seen homes where latex was used on oil-painted trim, and the paint started to peel in less than a year," says Doherty.
Second coats on similar colors are almost never recogicnized as being needed until the coat is applied and has dried. ONLY THEN WILL YOU SEE WHETHER IT NEEDS A SECOND COAT or not. Yes, painters can use a cheaper paint then what you paid for. That is solved by getting your own which, I would charge extra for because I will always have to go get more, or add second coat because home owner tried to skimp on paint, or they got the wrong color etc...
The materials of the home’s facade should be considered before painting your home. When painting flat surfaces like siding or wood, you can opt for standard outdoor paint. When painting a textured surface like stucco or brick, “elastomeric” paint is a much better choice. This type of paint can stretch more than normal paint, which allows it to bridge over small gaps and crevices, painting smoothly over texture.
×