ScotchBlue Delicate Surface Painter's Tape with Edge-Lock 2080EL ScotchBlue Delicate Surface Painter's Tape with Edge-Lock 2080EL features exclusive Advanced Edge-Lock Paint Line Protector to deliver super sharp paint lines. This tape can be used indoors or outdoors and removes cleanly for up to 60 days without surface or paint damage even when exposed to direct sunlight. ScotchBlue Delicate ... More + Product Details Close
Keep an eye on the new cans as they're being brought in. Make sure they look new and don't have paint in the rim of the can. If it's a five-gallon bucket, check to see whether the lid is still sealed on with the plastic strip. The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water.
Home Painter Company
The pros were split on this tip. "Masking tape is problematic," says Mark Dixon, a painter in Missoula, Montana, and author of "House Painting Inside and Out" (Taunton Press, 1997). "Paint can bleed behind the tape, or remove the paint it's stuck to." Another problem is bridging. "Latex paints form a skin," says Dixon. "Removing painted tape can tear the skin, resulting in a ragged rather than a sharp line." Lastly, taping takes time. "Learning how to cut in with a brush takes practice, but if you can do it, you'll leave most tapers in the dust," Dixon says. (Cutting in is painting just the surface you want, not the surface adjacent to it — for example, where a wall meets the ceiling.) On the other hand, "If you can't cut in, you can't beat tape," says Span. The pros we spoke with all recommend painter's (blue) tape because it's easier to remove than masking tape. To prevent bleeding, Span uses a putty knife to bed the tape. After letting the paint dry, he scores the edge of the tape line with a utility knife to avoid tearing the paint.
Sanding not only feathers out chipped paint but also provides "tooth" for the next coat of paint. For glossy trim, use a sanding sponge rather than sandpaper. Sponges mold to the shape of the trim and last longer than paper. When applying latex over alkyd paint or when he is not sure of the original finish, Brian Doherty, a painter in Richmond, Virginia, follows the hand-sanding with liquid sandpaper to make sure the surface is completely deglossed to prevent incompatibility problems. "I've seen homes where latex was used on oil-painted trim, and the paint started to peel in less than a year," says Doherty.
HIGHLY recommend this company. We needed to hire someone to paint the interior of our home. The owner came over initially to give a quote and was very nice. Talked to him about his family and his business. He is very experienced and takes pride in doing great work. They are licensed and have workers compensation insurance, which was really important for us. The actual painters included Sandy, who was amazing and helped me select the right paint colors for our house.
Interesting information! We just got scammed in White Stone, Virginia... we chose the same color, but went from a flat to an eggshell finish. I wasn't available to stand over the painter while he painted. For such a detailed job, I marveled at how quickly he finished the project! After he was paid for the job, we discovered all he did was roll paint across the walls and close to the crown, baseboards and detailed trim around windows and doors leaving about an inch or so of the flat finish. By using the same color, he didn't even do the job he was paid to do, which explained why he could finish the job so quickly. By using the same color... he got lucky and passed it off as a completed job not bothering to paint to and cut in around the trim. Upon further evaluation of our walls we could see exactly where he stopped because we could see the difference between the flat and eggshell finishes. There are walls he didn't even bother to paint. Then where he did paint near the crown when we were in the room watching ... he hit the crown moulding and tried to tell us it was already there... and tried to sell us on painting the crown moulding. I am so disgusted and upset!! He'll be hearing from us to rectify the situation.
Contractors apply several layers of paint to achieve a suitable finish. They leave the first coat to dry for the recommended time and apply one or more finishing coats. They might choose paints with special qualities for different types of room. Manufacturers have developed paints for bathrooms or kitchens that have good resistance to moisture for example. When they have completed painting, they clear away any equipment and restore the area to its original condition.
So sad that Angie's List requires the contractor be notified!! They have lost me as a client. If I'm dissatisfied and want to give an "F" rating (question/workers...I SHOULD NOT be intimidated into passing up an opportunity to explain my experience! There is NO WAY my contractor got an Aplus rating from over five hundred people....so someone was lying....yet I can't report that without the contractor knowing it? REALLY?
Painters with bad reputations can avoid the problem of reference checks by giving their customers lists of relatives and friends. The people will say great things, and the customer won’t be the wiser. The best way to avoid this smoke and mirror trick is to ask specific questions about the project. If the reference seems hesitant, doesn’t know the details, or gives sketchy responses, be skeptical.
David and his painting team were able to start working even sooner than they had told us originally and they finished much faster than we expected. This was so helpful to us since we were able to start moving things into our new home once they completed their work. We are so happy with the paint colors we chose; David made it easy for us by painting 3 different samples on the outside of the house to help us look at them as the light changed on the house for different times of day. We loved that he offered this to us since we were having trouble picking between 3 different shades of green.
Using the right software makes your job much easier and helps you get the best possible results. You can easily find the right paint combinations to please your client and quickly order the paint from a nearby store. A good field service management application, such as mHelpDesk, allows all departments of your business to smoothly coordinate their efforts, eliminating wasted time and producing happy customers.
Thanks for your detailed report on furniture placement. Cabins reception in my office layout. Your services are efficient and to my experience very authentic. I love working in my office space because you made it more vibrant. I feel the energy in my office environment. I am happy to say that I felt an instant change in my personal environment. I am certainly grateful to have met Mr. Parmar and will certainly be recommending you to all my business associated & friends who have watched this process in my office
I agree with JHs. If there is no new color on it at all, just talk to the painter about it, if it was an honest mistake (which can happen very easily while painting) your painter should have no problem fixing it. However, in my years of experience, it is not unusual for 2 coats of door paint (good quality) not to cover very well at all. I once painted a red door 7 times, plus a tinted prime coat before I found the door to be a solid color.