The materials of the home’s facade should be considered before painting your home. When painting flat surfaces like siding or wood, you can opt for standard outdoor paint. When painting a textured surface like stucco or brick, “elastomeric” paint is a much better choice. This type of paint can stretch more than normal paint, which allows it to bridge over small gaps and crevices, painting smoothly over texture.
Here is where this affects you as a consumer. You select a painter with a contract that says 2 coats, $500 down. You give the company the deposit and pick your colors a couple of days before the project starts. The painter goes to the store with your colors and figures out they are deep base. He (or she) not only needs to charge you more for the paint, but he also needs to charge you for a dark gray primer coat. Ninety nine percent of the time that primer coat is going to be really, really expensive since you already gave a deposit.
When the workers came they took care of all the stuff I'd seen other reviewers mention, removing old phone lines, some stucco work, but one thing I didn't expect is that one of my awnings had some dry rot that I'd planned to get fixed. There was slight language barrier but the workers took it into their own hands to saw off and repair the awning before painting it. Wow!
If the point of hiring a well established, experienced, reputable painting contractor is to secure the professionalism and trust suggested to be inherent with that choice, then I would EXPECT that professionalism and experience to include the ability to make the proper and correct calculations for labor and materials for a fixed price quote, and there should be NO reason for the contractor to put the cost burden of their miscalculation on the consumer.
After any areas repaired in the previous step are primed, we apply premium quality paints for a uniform finish. There are multiple finish options, including flat, matte, eggshell, satin, semi-gloss, and high-gloss, and we will have gone over the benefits of each with you beforehand so you can make an informed decision. The time will vary depending on the size of the job, but we will always ensure to work as quickly and efficiently as possible.
When coverage is difficult to estimate, add more rather than less when doing DIY wall painting. You can always pour the leftover back into cans. For large jobs, use the bucket and a roller screen rather than a roller tray. It’s much faster to load your roller with the screen than to use a roller pan. Simply dunk the roller into the paint bucket, then roll it along the screen until it stops dripping.
Climate is another factor to consider. Sunlight, wind, rain and salty weather can all wear out exterior paint. Oil-based paint is durable against wind, rain and temperature changes, but sunlight tends to degrade it. Alkyd paint chalks and sheds very thin layers when it begins to wear. Latex paint is the more durable option for very sun-drenched and relatively dry climate areas. Latex paint with high vinyl content should be avoided, however. Acrylic resin is by far the more durable binder for outdoor latex paint.
Keep an eye on the new cans as they're being brought in. Make sure they look new and don't have paint in the rim of the can. If it's a five-gallon bucket, check to see whether the lid is still sealed on with the plastic strip. The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water.