Most painters have no problem painting doors in place, but they recommend you lay the door on sawhorses and work horizontally. If you have a paneled door, start with the panels and work from the outside edges in toward the center. "Watch the corners — paint loves to puddle," warns Dixon. While the paint is still wet, lightly "tip off" the panel with an almost dry brush. (Tipping off is pulling the brush over the surface to level out the finish.) When painting the stiles (vertical) and rails (horizontal) just follow the grain of the wood. When the grain changes abruptly, for instance, where the rail meets the stile, don't stop your brush stroke — you'll only leave a lump of paint. Apply paint across the joint with a full stroke, and then tip off the overlapping section by pulling the brush in the direction of the grain. "Make sure the door is dry before painting the opposite side or rehanging it," says Maceyunas.
Here is where this affects you as a consumer. You select a painter with a contract that says 2 coats, $500 down. You give the company the deposit and pick your colors a couple of days before the project starts. The painter goes to the store with your colors and figures out they are deep base. He (or she) not only needs to charge you more for the paint, but he also needs to charge you for a dark gray primer coat. Ninety nine percent of the time that primer coat is going to be really, really expensive since you already gave a deposit.
Paint Life offers our Bid Package downloads that are an important part of the success of my painting company B&K Painting. The bid package is a compilation of over 20 pages that sells our business without ever meeting the customer. Its yours for $300. My bid package is a document that I have created and edited over a period of 13 years to its now almost perfect form. Don’t look like every other painter with a one page scratched out bid. Look like the best by giving your customers the best bid in your region. Click Here the read more and purchase.
Generally speaking, in order to be considered a contractor there are standards and minimum requirements that must be met. But a professional painting contractor provides so much more than what’s standard! As customers, it can be hard to come to terms or articulate exactly what it is that we are looking for. In many cases, we are simply not well researched or informed enough to make the best decisions based on our needs. But you really can’t afford to contract the wrong company. Not doing your homework may leave you under the assumption that you have hired a painting contractor, when in reality you have just hired a painter. When you hire just a painter, you as the homeowner have taken all responsibilities of a contractor. Now all the responsibilities, liability and management is on you!
Inspect the surface area for holes, cracks or other problems and apply acrylic caulk to fill them in. Use a putty knife to smooth out the caulk and remove any excess to prevent bumps. For particularly thin or narrow crevices, you may have to use your finger to smooth out the caulk. Caulk contracts and shrinks, so apply a second layer once it's dried.
Can't speak highly enough of the service we received from James and his team. I did my due diligence and met with 3 painters. If I'd have met with James first, I might have skipped the other meetings. He talked me out of some extra work that wouldn't have come out the way i'd envisioned and showed me a packet full of successful projects, happy clients that dated back to the 1970s.
The perfect roller would hold a roomful of paint, leave the right amount of texture, wouldn't spray or fuzz, and would be easy to clean. Until somebody invents the ideal one, follow these tips to choose the right roller. "The longer the nap, the more paint the roller will hold, but it will also create more texture." says Dixon. "A 1/2-inch nap lamb's-wool roller holds plenty of paint without too much texture," says Dixon. "Less expensive rollers can work," says Span. "Just wash them first in dishwashing liquid to remove any stray fibers." Most of the pros we spoke with prefer 9-inch rollers over 18-inch models -- they are lighter, cheaper, and easier to use. Despite these shortcomings, Maceyunas swears by the wider roller. "The roller can do a whole wall in a few up and down strokes instead of in several dozen W and M strokes," he says.
House Painter Co