We had an absolutely amazing experience getting the interior of our house painted by Color World. Tom was quick to give us his time for a quote and go over all questions we had. Shell was informative and very accurate on helping us choose our colors. They couldn’t have sent a better crew of painters led by Shaun Childers. They have completely changed our lives and made our home something we are proud to show off and come home to. Highly Recommend! Flawless from start to finish! 😁

Project management is important for contracted painting jobs because it helps with communication and lowers the chance of complaints.  The fact is, contracting is the #1 source of consumer complaints in the state and project management is what triggers most calls to the State Contractor’s License Board and the Better Business Bureau. With a proper project management system in place, these complaints can be avoided and your job will be completed the right way.
Painters with bad reputations can avoid the problem of reference checks by giving their customers lists of relatives and friends.  The people will say great things, and the customer won’t be the wiser.  The best way to avoid this smoke and mirror trick is to ask specific questions about the project. If the reference seems hesitant, doesn’t know the details, or gives sketchy responses, be skeptical. 

A good paintbrush is key to a professional-looking finish. "A quality brush costs $15 to $25, but you'll discover that pros aren't as talented as you thought," says Doherty. "The equipment has a lot to do with their success." Most of our pros prefer natural-bristle brushes for oil-based paints, but they recommend synthetics for all-around use. When choosing a brush, pay attention to the bristles. Synthetic brushes are made of nylon or polyester, or a combination of the two. Poly bristles are stiffer, which makes them good for exterior or textured work, but for fine interior work, Doherty uses softer nylon brushes. Look also for tapered bristles, which can help you work to an edge, and flagged tips, which help spread the finish smoothly and evenly. Brushes are available in 1- to 4-inch widths. Most painters keep an arsenal on hand to match the job. "Use common sense," says Maceyunas. "A smaller brush gives you more control, but no one wants to paint a door with a 1-inch-wide brush." Doherty recommends starting with a 2- or 2-1/2-inch sash brush. The angled brush makes it easier to cut to a line and puts more bristles on the work than a square-tipped brush.
I’m sure I’d have a mustache full of beer and a stein full of tears, if only I could stand to drink it. I had my first sip of beer at age seven and that was enough to turn me off for life. So…at least there’s chocolate. All that said, we’ve still got a Paint Contractor full of useful and entertaining content—this being our last issue, we wanted to go out classy and take our last chance to profile a great painter and help you into a new year even if we can’t follow.

Ours was a big job. We chose to work with three colors, one of which Sang and his partner painstakingly applied to all our window trim and grids. But before the colors came the preparation. The detail and precision of their work can not be understated. Even the taping of plastic was performed with purpose, each edge a clean line. Sang inspected all phases (patching, sanding, and power washing) with great attention and after three days of intensive work, it was time for primer and paint. Sang is knowledgeable and gave us great advice on how to best use our colors. Again, he payed close attention to detail, making sure that our house looked beautiful. We are extremely pleased!
I used this company back in around 2006-8, three different projects, interior work. Very professional, quality work and very clean. Never disappointed. What really stood out was the professionalism of this company, especially Ryan. Several years after the work was done, I needed to paint a large spot on my wall that was previously painted by Ryan's company. I couldn't find the paint color that was used. I contacted Ryan for the information, within less than an hour he sent me via email the exact paint used and it's color formula. Again, Ryan is the ultimate professional and provides the best customer service I've ever experienced. I used to do construction with my father as a teenager, I know quality work and I know and see when details are addressed in this companies workmanship. I hIghly recommend this company without any hesitation!

Most painters have no problem painting doors in place, but they recommend you lay the door on sawhorses and work horizontally. If you have a paneled door, start with the panels and work from the outside edges in toward the center. "Watch the corners — paint loves to puddle," warns Dixon. While the paint is still wet, lightly "tip off" the panel with an almost dry brush. (Tipping off is pulling the brush over the surface to level out the finish.) When painting the stiles (vertical) and rails (horizontal) just follow the grain of the wood. When the grain changes abruptly, for instance, where the rail meets the stile, don't stop your brush stroke — you'll only leave a lump of paint. Apply paint across the joint with a full stroke, and then tip off the overlapping section by pulling the brush in the direction of the grain. "Make sure the door is dry before painting the opposite side or rehanging it," says Maceyunas.


Upon first impression they were amazing and gave a great quote to paint my house in Pacific Palisades.  We settled on a start date of December 3rd.  The date came and went and they did not show up.  I had to follow up with them and they said they would come the first week of January.  I have put two calls into them today and they have not returned my call.
If you are going to hire a contractor (professional painter) give a room by room punch list of the fixing of holes small or big, have it identified for the painter to tell you if you need a drywall finisher or if he does this type of work good. Wall repairs can be 3-5 steps to do repairs ( one per day for good drying of patching material and a good sanding) this is what gives you a good paint job only using high quality paint.
Receive for your contractor’s license. Once you’ve passed your licensing exam, registered your business through the proper channels and shown proof of liability insurance, you can submit an official application to receive your contractor’s license. This can be done online or by mail. Following a short review process, you’ll be issued your license, after which you can get to work securing jobs and building your business’s reputation.[20]

The Evolution System uses a 100% solids polyurea with unique technology that offers extreme adhesion, rapid cure, and maximum broadcast times. The vinyl flakes come in a variety of blends to mix and match with your choice of basecoat colors. This is one of the most popular systems for because of its wide variety of applications. Walk on in 4 hours & drive on in 24 hours.

Using the right software makes your job much easier and helps you get the best possible results. You can easily find the right paint combinations to please your client and quickly order the paint from a nearby store. A good field service management application, such as mHelpDesk, allows all departments of your business to smoothly coordinate their efforts, eliminating wasted time and producing happy customers.
His team is very meticulous, very careful, very clean, and very courteous! They're also very accommodating. For instance, I mentioned a couple spots under some angled siding where I thought a little extra filling was needed, and they obliged without question. Same thing with a request for a stain-proof primer under a balcony. Doing these kinds of little things without question or extra charges is really nice!

Paint Contractor

×