Even if you go it alone, specialize to keep your initial investment low. If you do only interior painting, for example, you might get by with one ladder, a few brushes, rollers, basic hand tools and such, for an investment of less than $300. Again, you can add to your tools as you need to (every job is a bit different), and parlay profits into the equipment necessary for exterior painting or working on large commercial properties.
Our team of industrial, commercial & residential paint contractors have many years of experience working on projects of all sizes. All projects are managed and staffed by in-house professional employees from start to finish. With our attention to detail and commitment to excellent customer service, you can be assured that your project will be successfully completed on time and within your budget.
When the workers came they took care of all the stuff I'd seen other reviewers mention, removing old phone lines, some stucco work, but one thing I didn't expect is that one of my awnings had some dry rot that I'd planned to get fixed. There was slight language barrier but the workers took it into their own hands to saw off and repair the awning before painting it. Wow!
Interesting information! We just got scammed in White Stone, Virginia... we chose the same color, but went from a flat to an eggshell finish. I wasn't available to stand over the painter while he painted. For such a detailed job, I marveled at how quickly he finished the project! After he was paid for the job, we discovered all he did was roll paint across the walls and close to the crown, baseboards and detailed trim around windows and doors leaving about an inch or so of the flat finish. By using the same color, he didn't even do the job he was paid to do, which explained why he could finish the job so quickly. By using the same color... he got lucky and passed it off as a completed job not bothering to paint to and cut in around the trim. Upon further evaluation of our walls we could see exactly where he stopped because we could see the difference between the flat and eggshell finishes. There are walls he didn't even bother to paint. Then where he did paint near the crown when we were in the room watching ... he hit the crown moulding and tried to tell us it was already there... and tried to sell us on painting the crown moulding. I am so disgusted and upset!! He'll be hearing from us to rectify the situation.
If you decide to hire help, have several contractors inspect the job and provide proposals. You'll probably find huge price differences for the same job. A Checkbook undercover shopper got quotes from nine Washington-area contractors to repaint the walls, ceiling and trim for a living room, dining room, family room, bathroom and kitchen. Including paint and supplies, prices ranged from $2,650 or less to more than $6,500.
When I had my interior painting done, after clearing out all of the furniture, myself, I also removed all of the wall plates in all the rooms to be painted. They were a beige color and probably yellowed. The wall was originally an off white and I had it painted a light-mid grey, so those wall plates would look terrible. After pricing replacement plates, switches and outlets (Would have been way too expensive to replace all of them), I decided to just paint all of the wall plates, switches and outlets (Used just a black gloss spray paint). I sprayed the plates outside and used a small brush on the switches and outlets. It worked out just fine and the blacks plates, etc compliment the wall color. It has been 7 years and the plates, switches, outlets are holding up well.
This is another reason why you should always hire contractors who have employees and not those who use subcontractors. If the company you hire uses only subs to paint, they have no control over the training those subs receive. However, even if you choose a contractor with employees, this does not guarantee that those employees receive training. The sad fact is that training just isn’t in the budget for most contractors.
The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water. (You never use a sprayer and need to thin paint.?) If i was still in the industry I'd take the time to make a better article than this. Take this for a grain of slat. Use a reputable painter or someone you know you can trust or has been referred to you by someone you trust. I wouldn't hire anyone I had to watch like a hawk to make sure they're not screwing me.
Your home is your most important asset and maintaining it is vital in upholding and increasing its value. As a full-service painting company, Home Works Painting will provide you with a superior professional painting experience. Our services include interior/exterior painting, drywall repair/installation, wood replacement, pressure washing, and color consulting. We stand behind our work by offering a six year warranty.
Shopping for the right paint should go beyond collecting paint swatches or choosing a shade from the catalogue. Purchasing inexpensive paint samples and small brushes to bring home for testing is the best, because it's the only way to really ascertain whether a color suits the décor. The goal is to paint a small section of the wall — a square with an area of just a few inches is sufficient. Allowing the small painted patch to dry and observing how it looks under the lighting conditions at different times of the day should clear up any painter’s color dilemma.
Color World is a one-of-a-kind painting company, with a history of painting houses since 1997. We not only provide house painting services, we also offer commercial painting, power washing, gutter installation, holiday lighting, and minor drywall and carpentry work, plus much more. We are a truly unique operation, offering the services of five businesses in one. If you’re a homeowner looking for affordable painting and so much more, Color World can meet your needs. We have worked with several homes in your neighborhood and serve as your local, readily available contractors.
Disclaimer: NerdWallet strives to keep its information accurate and up to date. This information may be different than what you see when you visit a financial institution, service provider or specific product’s site. All financial products, shopping products and services are presented without warranty. When evaluating offers, please review the financial institution’s Terms and Conditions. Pre-qualified offers are not binding. If you find discrepancies with your credit score or information from your credit report, please contact TransUnion® directly.
Referred by a neighbor, I got an estimate from Excel along with two other companies to paint the exterior of our home; their estimate was the cheapest by at least a grand compared to the other companies. They contacted me a couple of weeks earlier than expected and offered to do the power washing a week or so earlier due to an opening in their schedule, another opening got them to our house 2 weeks earlier than planned to paint!!!
We had a bad experience with an interior painter years ago, with the crux of the problem being him overcharging us at the end for "extra work" he didn't anticipate. One thing I'd strongly recommend is making sure it's in the contract that any additional work or growth work is estimated and communicated to the owner as soon as it is identified, otherwise the owner is not liable to pay it at the end.
File the necessary business documents. For starters, you’ll need a general business license to begin taking on contract work. You may also have to have other specific licenses that permit you to operate in off-limits zones or handle certain materials. A separate home business permit will be required if you plan on using your own residence as the headquarters for your contracting business.
Receive for your contractor’s license. Once you’ve passed your licensing exam, registered your business through the proper channels and shown proof of liability insurance, you can submit an official application to receive your contractor’s license. This can be done online or by mail. Following a short review process, you’ll be issued your license, after which you can get to work securing jobs and building your business’s reputation.
to be the devils advocate i have been a building contractor 20 of the last 30 yrs. i do know that if you go to a higher sheen of paint and or darker colors then any imperfections in the walls will show up much more dramatically…therefore the painter or a good drywall finisher is needed to prepare the walls extensively. this could cause more expenses…for it takes a lot of time to prep walls (smooth walls..not textured walls) and this cost has to be absorbed.
Being in the business for 25+ years I have had the privilege of working with thousands of clients. Although they all came from different circumstances and backgrounds they all had one common goal in mind. Every one of them wanted to be respected, receive top value for their money, and get the best possible paint job for their most prized possession, their house!
Estimate: Short and sweet, but HIGHLY accurate. We wanted to use our own paint as there was a particular no VOC kind I wanted to use, and this was never an issue for them. They knew exactly how much we needed for the job based on the specs from the website of the company we were ordering it from, so we could order it without issue. The estimate was right inline with two other companies we received quotes from.
Most interior painting projects will present corners and edges. Corners, trims, splashes and accents will require cutting in — which generally requires the most patience, preparation and skill. There is a lot of debate among painters whether it is better to cut in before or after applying the roller. Solo painters may want to prepare the surfaces first, apply painter’s tape where required and cut in before applying paint to the rollers. Painters working in teams can split cutting in duties in sections while other team members are applying paint with rollers.
Color is always the first consideration when painting a home. Most paint manufacturers offer samples to try that can allow you to make a more informed decision. Because light within a room may vary from wall to wall as well as from day to night, try painting a large piece of poster board in the color or colors you are considering. Move the board from wall to wall and look at it for a minimum of 24 hours at a time in each space to make sure you like the color before committing.
Only a dummy gets involved with so-called "contractors." Hire a qualified actual worker yourself. Check out their resume/background, etc. RULE #1..NO ADVANCE DEPOSITS! Pay daily or weekly or upon satisfied completion according your standard, not workers. Contractors are merely employment agents. If that's the way you get work done, then go ahead and waste your money and wind up with the myriad of problems enumerated upon in the news clip above. RULE#2.. NO SMOKERS. They are lighting up on your money. RULE#3: No cell phones while working. Talk on their own time after work
Second coats on similar colors are almost never recogicnized as being needed until the coat is applied and has dried. ONLY THEN WILL YOU SEE WHETHER IT NEEDS A SECOND COAT or not. Yes, painters can use a cheaper paint then what you paid for. That is solved by getting your own which, I would charge extra for because I will always have to go get more, or add second coat because home owner tried to skimp on paint, or they got the wrong color etc...
The perfect roller would hold a roomful of paint, leave the right amount of texture, wouldn't spray or fuzz, and would be easy to clean. Until somebody invents the ideal one, follow these tips to choose the right roller. "The longer the nap, the more paint the roller will hold, but it will also create more texture." says Dixon. "A 1/2-inch nap lamb's-wool roller holds plenty of paint without too much texture," says Dixon. "Less expensive rollers can work," says Span. "Just wash them first in dishwashing liquid to remove any stray fibers." Most of the pros we spoke with prefer 9-inch rollers over 18-inch models -- they are lighter, cheaper, and easier to use. Despite these shortcomings, Maceyunas swears by the wider roller. "The roller can do a whole wall in a few up and down strokes instead of in several dozen W and M strokes," he says.